Ñèñòåìà ðåäàêòèðîâàíèÿ ñòàëüíûõ ñîðòàìåíòîâ ÐÑ ïðåäíàçíà÷åíà äëÿ ñîçäàíèÿ íîâûõ è ðåäàêòèðîâàíèÿ ñóùåñòâóþùèõ ñîðòàìåíòíûõ áàç ïðîêàòíûõ è ñâàðíûõ ïðîôèëåé, à òàêæå ñòàëåé è ñïëàâîâ, èñïîëüçóåìûõ ïðè èõ èçãîòîâëåíèè.

ÐÑ èíôîðìàöèîííî ñâÿçàíà ñ ðàñ÷¸òíûìè è êîíñòðóèðóþùèìè ñèñòåìàìè LIRA-FEM.

Ðåäàêòèðóåìûé ñîðòàìåíò

Èìåþùèåñÿ ñîðòàìåíòû â LIRA-FEM

ÐÑ âêëþ÷àåò øèðîêèé íàáîð ñóùåñòâóþùèõ ñîðòàìåíòíûõ áàç ïðîôèëåé è ñòàëåé ñòðàí ÑÍÃ, Åâðîïû, ÑØÀ è Àçèè.

Ñòàëè
  • EN 10225:2009. Weldable structural steels for fixed offshore structures
  • EN 10025-2:2004. Non-alloy structural steels for hot rolled products
  • EN 10025-3:2004. Normalized/normalized rolled structural steels for hot rolled products
  • EN 10025-4:2004. Thermomechanical rolled weldable fine grain structural steels for hot rolled products
  • EN 10025-5:2004. Structural steels with improved atmospheric corrosion resistance for hot rolled products
  • EN 10025-6:2004. High yield strength structural steels in the quenched and tempered conditions for hot rolled flat products
  • EN 10340:2007. Steel castings for structural uses
  • EN 10219-1:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels
  • EN 10326:2004. Continuously hot-dip coated strip and sheet of structural steels
  • EN 10210-1:2006. Hot finished structural hollow sections of non-alloy and fine grain steel
  • EN 1993-1-1:2005. Hot rolled structural steel
  • EN 10147:2000. Continuously hot-dip zinc coated structural steels strip and sheet
  • EN 10113:1993. Hot-rolled products in weldable fine grain structural steels
  • EN 10137:1996. Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions
  • EN 1993-1-1:2005. Non-alloy and fine grain steels for hot finished structural hollow sections
  • EN 1993-1-1:2005. Non-alloy and fine grain steels for cold formed welded structural hollow sections
  • ASTM. Structural Steel Specifications
  • ASTM. Availability of Steel Pipe
  • ASTM. Availability of Steel Structural Tubing
  • ÑÍèÏ II-23-81*. Ëèñòîâà ñòàëü
  • ÑÍèÏ II-23-81*. Ñòàëü äëÿ òðóá
  • ÑÍèÏ II-23-81*. Ôàñîííà ñòàëü
  • ÃÎÑÒ 4543-2016. Ìåòàëëîïðîäóêöèÿ èç êîíñòðóêöèîííîé ëåãèðîâàííîé ñòàëè
  • ÃÎÑÒ 1050-2013. Ìåòàëëîïðîäóêöèÿ èç íåëåãèðîâàííûõ êîíñòðóêöèîííûõ âûñîêîêà÷åñòâåííûõ è ñïåöèàëüíûõ ñòàëåé
  • ÃÎÑÒ 535-2005. Ïðîêàò ñîðòîâîé è ôàñîííûé èç óãëåðîäèñòîé ñòàëè îáû÷íîãî êà÷åñòâà
  • ÃÎÑÒ 27772-2015. Ïðîêàò äëÿ ñòðîèòåëüíûõ ñòàëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 27772-88. Ïðîêàò äëÿ ñòðîèòåëüíûõ ñòàëüíûõ êîíñòðóêöèé
  • ÑÍèÏ II-23-81*. Ñòàëü äëÿ òðóá
  • ÑÏ 16.13330.2011. Ñòàëü ôàñîííàÿ è ëèñòîâàÿ
  • ÑÏ 16.13330.2011. Ñòàëü äëÿ òðóá
  • ÑÏ 260.1325800.2016. Êîíñòðóêöèè ñòàëüíûå òîíêîñòåííûå èç õîëîäíîãíóòûõ îöèíêîâàííûõ ïðîôèëåé è ãîôðèðîâàííûõ ëèñòîâ
  • ÄÑÒÓ EN 10025-2:2007. Ñòàë³ íåëåãîâàí³ êîíñòðóêö³éí³ äëÿ ãàðÿ÷åêàòàíèõ âèðîá³â
  • ÄÑÒÓ EN 10025-3:2007. Ñòàë³ äð³áíîçåðíèñò³ êîíñòðóêö³éí³ äëÿ ãàðÿ÷åêàòàíèõ âèðîá³â, ï³ääàíèõ íîðìàë³çàö³¿ àáî íîðìàë³çóâàëüíîìó ïðîêàòóâàííþ
  • ÄÑÒÓ EN 10025-4:2007. Ñòàë³ äð³áíîçåðíèñò³ òåðìîìåõàí³÷íîîáðîáëåí³ çâàðþâàíèõ äð³áíîçåðíèñòèõ ñòàëåé
  • ÄÑÒÓ EN 10025-5:2007. Ñòàë³ êîíñòðóêö³éí³ ç ï³äâèùåíîþ òðèâê³ñòþ äî àòìîñôåðíî¿ êîðî糿 äëÿ ãàðÿ÷åêàòàíèõ âèðîá³â
  • ÄÑÒÓ EN 10025-6:2007. Ñòàë³ êîíñòðóêö³éí³ ç âèñîêîþ ãðàíèöåþ ïëèííîñò³ â çàãàðòîâàíîìó òà â³äïóùåíîìó ñòàí³ äëÿ ãàðÿ÷åêàòàíèõ ïëîñêèõ âèðîá³â
  • ÄÑÒÓ EN 10210-1:2009. Ñòàë³ íåëåãîâàí³ òà äð³áíîçåðíèñò³ êîíñòðóêö³éí³ äëÿ ïîðîæíèñòèõ ïðîô³ë³â ãàðÿ÷îãî îáðîáëåííÿ
  • ÄÑÒÓ EN 10219-1:2009. Ñòàë³ íåëåãîâàí³ òà äð³áíîçåðíèñò³ êîíñòðóêö³éí³ äëÿ õîëîäíîãíóòèõ çâàðíèõ ïîðîæíèñòèõ ïðîô³ë³â
  • ÄÑÒÓ-Í Á EN 1993-1-1:2010. Ñòàë³ ãàðÿ÷åêàòàí³ êîíñòðóêö³éí³
  • ÄÁÍ Â.2.6-198:2014. Ñòàëü, ëèñò
  • ÄÁÍ Â.2.6-198:2014. Ñòàëü, òðóáà
  • ÄÁÍ Â.2.6-198:2014. Ñòàëü, ôàñîí
  • ÄÑÒÓ 8938:2019. Òðóáè ñòàëåâ³ áåçøîâí³ ãàðÿ÷åäåôîðìîâàí³
  • ÄÑÒÓ 8539:2015. Ïðîêàò äëÿ áóä³âåëüíèõ ñòàëåâèõ êîíñòðóêö³é
  • ÄÑÒÓ 8541:2015. Ïðîêàò ñòàëåâèé ï³äâèùåíî¿ ì³öíîñò³
  • ÄÑÒÓ-Í Á EN 1993-1-1:2010. Ñòàë³ íåëåãîâàí³ òà äð³áíîçåðíèñò³ êîíñòðóêö³éí³ äëÿ ïîðîæíèñòèõ ïðîô³ë³â ãàðÿ÷îãî îáðîáëåííÿ
Àëþìèíèåâûå ñïëàâû
  • EN 754. Aluminium and aluminium alloys - Cold drawn rod/bar and tube
  • EN 755. Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles
  • EN 485. Aluminium and aluminium alloys - Sheet, strip and plate
  • ÃÎÑÒ 21631-76. Ëèñòû èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÃÎÑÒ 17232-99. Ïëèòû èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÃÎÑÒ Ð 56282-2014. Ïðîôèëè ïðåññîâàííûå êðóïíîãàáàðèòíûå ñïëîøíûå èç àëþìèíèåâûõ ñïëàâîâ
Ðàâíîïîëî÷íûå óãîëêè
  • EN 10056-1:2017. Structural steel equal and unequal leg angles
  • DIN 1028. Hot rolled, round edge equal angles
  • ASTM A6/A6M. General requirements for structural steel plates, shapes, bars and sheet piling
  • ÄÑÒÓ 2251:2018. Êóòèêè ñòàëåâ³ ãàðÿ÷åêàòàí³ ð³âíîïîëè÷í³
  • ÃÎÑÒ 8509-86. Óãîëêè ñòàëüíûå ãîðÿ÷åêàòàíûå ðàâíîïîëî÷íûå
  • ÃÎÑÒ 8509-93. Óãîëêè ñòàëüíûå ãîðÿ÷åêàòàíûå ðàâíîïîëî÷íûå
  • ÃÎÑÒ 19771-93. Óãîëêè ñòàëüíûå ãíóòûå ðàâíîïîëî÷íûå
  • JG/T 380-2012. Cold-formed Thin-wall Steel Sections for Building Structures
  • GB/T 706-2016. Hot rolled section steel
  • IS 808:1989. Dimensions for hot rolled steel beam, column, channel and angle sections
Íåðàâíîïîëî÷íûå óãîëêè
  • EN 10056-1:2017. Structural steel equal and unequal leg angles
  • DIN 1029. Hot rolled unequal leg angles with round edges
  • ASTM A6/A6M. General requirements for structural steel plates, shapes, bars and sheet piling
  • ÃÎÑÒ 8510-72. Ñòàëü ïðîêàòíàÿ óãëîâàÿ íåðàâíîïîëî÷íàÿ
  • ÃÎÑÒ 19772-93. Óãîëêè ñòàëüíûå ãíóòûå íåðàâíîïîëî÷íûå
  • ÑÏ 128.13330.2016. Äåìîíñòðàöèîííûé ñîðòàìåíò àëþìèíèåâûé óãîëîê
  • JG/T 380-2012. Cold-formed Thin-wall Steel Sections for Building Structures
  • GB/T 706-2016. Hot rolled section steel
  • IS 808:1989. Dimensions for hot rolled steel beam, column, channel and angle sections
Äâóòàâðû
  • EN 10365:2017. Hot rolled steel channels, I and H sections
  • DIN 1025-1. Hot rolled I and H sections (I series)
  • DIN 1025-2. Hot rolled I and H sections (IPB series)
  • DIN 1025-3. Hot rolled I and H sections (IPBl series)
  • DIN 1025-4. Hot rolled I and H sections (IPBv series)
  • DIN 1025-5. Hot rolled I and H sections (IPE series)
  • ASTM A6/A6M. General requirements for structural steel plates, shapes, bars and sheet piling
  • ÄÑÒÓ 8768:2018. Äâîòàâðè ñòàëåâ³ ãàðÿ÷åêàòàí³
  • ÄÑÒÓ 8807:2018. Áàëêè äâîòàâðîâ³ òà øâåëåðè ñòàëåâ³ ñïåö³àëüí³
  • ÒÓ 0925-001-97638531-2016. Äâóòàâðû ñòàëüíûå ñâàðíûå
  • ÒÓ Ó 01412851.001-95. Äâóòàâðû ñòàëüíûå ñâàðíûå
  • ÒÓ 14-2-24-72. Ñòàëü ãîðÿ÷åêàòàíàÿ. Äâóòàâðû ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê.
  • ÃÎÑÒ 26020-83. Äâóòàâðû ñòàëüíûå ãîðÿ÷åêàòàíûå ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê
  • ÃÎÑÒ 8239-72*. Ñòàëü ãîðÿ÷åêàòàíàÿ. Áàëêè äâóòàâðîâûå ñ óêëîíîì âíóòðåííèõ ãðàíåé ïîëîê
  • ÃÎÑÒ 8239-89. Äâóòàâðû ñòàëüíûå ãîðÿ÷åêàòàíûå
  • ÃÎÑÒ Ð 51685-2000. Ðåëüñû æåëåçíîäîðîæíûå
  • ÃÎÑÒ 4121-96. Ðåëüñû êðàíîâûå
  • ÃÎÑÒ Ð 57837-2017. Äâóòàâðû ñòàëüíûå ãîðÿ÷åêàòàíûå ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê
  • ÃÎÑÒ Ð 58966-2020. Áàëêè ñòàëüíûå äâóòàâðîâûå ñâàðíûå
  • ÃÎÑÒ 35087-2024. Äâóòàâðû ñòàëüíûå ãîðÿ÷åêàòàíûå
  • ÑÒÎ ÀÑ×Ì 20-93. Äâóòàâðû ãîðÿ÷åêàòàíûå ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê
  • GB/T 6728-2017. Cold forming hollow sectional steel for general structure
  • IS 808:1989. Dimensions for hot rolled steel beam, column, channel and angle sections
  • IS 12778:2004. Hot rolled parallel flange steel sections for beams, columns and bearing piles
Òàâðû
  • EN 10055-1996. Hot rolled steel equal flange tees with radiused root and toes
  • DIN 1024. Steel bars, hot rolled, round-edged T-sections
  • ASTM A6/A6M. General requirements for structural steel plates, shapes, bars and sheet piling
  • ÃÎÑÒ 8239-72*. Ñòàëü ãîðÿ÷åêàòàíàÿ. Áàëêè äâóòàâðîâûå ñ óêëîíîì âíóòðåííèõ ãðàíåé ïîëîê
  • ÒÓ 14-2-24-72. Ñòàëü ãîðÿ÷åêàòàíàÿ. Äâóòàâðû è òàâðû ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê
  • GB/T 11263-2010. Hot-rolled H and cut T section steel
Øâåëëåðû
  • EN 10365:2017. Hot rolled steel channels, I and H sections
  • DIN 1026. Steel Bars, Steel Sections; Hot Rolled Round Edge Channels
  • ASTM A6/A6M. General requirements for structural steel plates, shapes, bars and sheet piling
  • ÄÑÒÓ 3436-96. Øâåëåðè ñòàëåâ³ ãàðÿ÷åêàòàí³
  • ÃÎÑÒ 8240-72. Ñòàëü ãîðÿ÷åêàòàíàÿ. Øâåëëåðû
  • ÃÎÑÒ 8278-83. Øâåëëåðû ñòàëüíûå ãíóòûå ðàâíîïîëî÷íûå
  • ÃÎÑÒ 8240-97. Øâåëëåðû ñòàëüíûå ãîðÿ÷åêàòàíûå
  • ÒÓ Ó 24.1-05393056-003:2020. Øâåëëåðû ãîðÿ÷åêàòàíûå òîíêîñòåííûå îáëåã÷¸ííûå ñ ïàðàëëåëüíûìè ãðàíÿìè ïîëîê
  • ÒÓ 1121-001-13830080-2003. ÒÍ òåðìîïðîôèëü íàïðàâëÿþùèé ÎÎÎ "ÁàëòÏðîôèëü"
  • ÒÓ 1121-001-13830080-2003. Ïðîôèëü ðàâíîïîëî÷íûé äëÿ ôåðì ÎÎÎ "ÁàëòÏðîôèëü"
  • ÒÓ 1121-001-13830080-2003. ÏÍ ïðîôèëü íàïðàâëÿþùèé ÎÎÎ "ÁàëòÏðîôèëü"
  • ÑÒÎ 02494680-073-2020. Øâåëëåðû ñòàëüíûå ãíóòûå ðàâíîïîëî÷íûå "Akfabuid"
  • ÑÏ 128.13330.2016. Äåìîíñòðàöèîííûé ñîðòàìåíò àëþìèíèåâûé øâåëëåð
  • IS 808:1989. Dimensions for hot rolled steel beam, column, channel and angle sections
  • GB/T 706-2016: Hot rolled section steel
  • JG/T 380-2012. Cold-formed Thin-wall Steel Sections for Building Structures
Êðóãëûå òðóáû
  • EN 10210:2006. Hot finished structural hollow sections of non-alloy and fine grain steels
  • EN 10219:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels
  • DIN 2458. Welded Steel Pipes and Tubes
  • ÄÑÒÓ EN 10219-2:2009. Ïðîô³ë³ ïîðîæíèñò³ çâàðí³ õîëîäíîãî ôîðìóâàííÿ ç íåëåãîâàíèõ ³ äð³áíîçåðíèñòèõ ñòàëåé äëÿ êîíñòðóêö³é
  • ÄÑÒÓ 8943:2019. Òðóáè ñòàëåâ³ åëåêòðîçâàðí³
  • ÃÎÑÒ 10704-76*. Òðóáû ñòàëüíûå ýëåêòðîñâàðíûå ïðÿìîøîâíûå
  • ÃÎÑÒ 10704-91. Òðóáû ñòàëüíûå ýëåêòðîñâàðíûå ïðÿìîøîâíûå
  • ÃÎÑÒ 8732-78. Òðóáû ñòàëüíûå áåñøîâíûå.
  • ÃÎÑÒ Ð 58064-2018. Òðóáû ñòàëüíûå ñâàðíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 18475-82. Òðóáû õîëîäíîäåôîðìèðîâàííûå èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÃÎÑÒ 18482-79 (ÑT ÑÝÂ 3290-81). Òðóáû ïðåññîâàííûå èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÃÎÑÒ 14482-2018. Òðóáû ïðåññîâàííûå èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÃÎÑÒ 23697-79. Òðóáû ñâàðíûå ïðÿìîøîâíûå èç àëþìèíèåâûõ ñïëàâîâ
  • IS 3601:2006. Steel tubes for mechanical and general engineering purposes
  • GH/T 6728-2017. Cold forming hollow sectional steel for general structure
Êâàäðàòíûå òðóáû
  • EN 10210:2006. Hot finished structural hollow sections of non-alloy and fine grain steels
  • EN 10219:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels
  • DIN 59410. Hollow Sections for Structural Steel Engineering; Hot Formed Square and Rectangular Steel Tubes
  • ÄÑÒÓ 8940:2019. Òðóáè ñòàëåâ³ ïðîô³ëüí³
  • ÒÓ 36-2287-80. Ïðîôèëè ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå
  • ÃÎÑÒ 25577-83. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå
  • ÃÎÑÒ 30245-94. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 30245-2003. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 30245-2012. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 8639-82. Òðóáû ñòàëüíûå êâàäðàòíûå
  • ÃÎÑÒ 18475-82. Òðóáû õîëîäíîäåôîðìèðîâàííûå èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÑÏ 128.13330.2016. Äåìîíñòðàöèîííûé ñîðòàìåíò àëþìèíèåâîé êâàäðàòíîé òðóáû
  • IS 4923:1997. Hollow steel sections for structural use
  • GH/T 6728-2017. Cold forming hollow sectional steel for general structure
Ïðÿìîóãîëüíûå òðóáû
  • EN 10210:2006. Hot finished structural hollow sections of non-alloy and fine grain steels
  • EN 10219:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels
  • ÄÑÒÓ 8940:2019. Òðóáè ñòàëåâ³ ïðîô³ëüí³
  • ÄÑÒÓ EN 10219-2:2009. Ïðîô³ë³ ïîðîæíèñò³ çâàðí³ õîëîäíîãî ôîðìóâàííÿ ç íåëåãîâàíèõ ³ äð³áíîçåðíèñòèõ ñòàëåé äëÿ êîíñòðóêö³é
  • ÃÎÑÒ 25577-83. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå
  • ÃÎÑÒ 30245-94. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 30245-2003. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 30245-2012. Ïðîôèëè ñòàëüíûå ãíóòûå çàìêíóòûå ñâàðíûå êâàäðàòíûå è ïðÿìîóãîëüíûå äëÿ ñòðîèòåëüíûõ êîíñòðóêöèé
  • ÃÎÑÒ 8645-68. Òðóáû ñòàëüíûå ïðÿìîóãîëüíûå
  • ÃÎÑÒ 18475-82. Òðóáû õîëîäíîäåôîðìèðîâàííûå èç àëþìèíèÿ è àëþìèíèåâûõ ñïëàâîâ
  • ÑÏ 128.13330.2016. Äåìîíñòðàöèîííûé ñîðòàìåíò àëþìèíèåâîé ïðÿìîóãîëüíîé òðóáû
  • IS 4923:1997. Hollow steel sections for structural use
  • GH/T 6728-2017. Cold forming hollow sectional steel for general structure
Ñ-ïðîôèëè
  • ÄÑÒÓ Á Â.2.6-75:2008. Ïðîô³ëü Ñ-ïîä³áíèé "PRUSZYNSKI"
  • ÒÓ 1121-001-13830080-2003. Ïðîôèëü Ñ-îáðàçíûé "ÁàëòÏðîôèëü"
  • ÑÒÎ 02494680-073-2020. Ïðîôèëü Ñ-îáðàçíûé "Akfabuid"
  • ÃÎÑÒ 8282-76. Ïðîôèëè ñòàëüíûå ãíóòûå Ñ-îáðàçíûå ðàâíîïîëî÷íûå
  • ÃÎÑÒ 8282-83. Ïðîôèëè ñòàëüíûå ãíóòûå Ñ-îáðàçíûå ðàâíîïîëî÷íûå
  • ÃÎÑÒ Ð 52246-2016. Ïðîêàò ëèñòîâîé ãîðÿ÷åîöèíêîâàííûé
  • JG/T 380-2012. Cold-formed Thin-wall Steel Sections for Building Structures
Z-ïðîôèëè
  • ÄÑÒÓ Á Â.2.6-75:2008. Ïðîô³ëü Z-ïîä³áíèé "PRUSZYNSKI"
  • ÑÒÎ 02494680-073-2020. Ïðîôèëü Z-îáðàçíûé "Akfabuid"
  • ÃÎÑÒ Ð 52246-2016. Ïðîêàò ëèñòîâîé ãîðÿ÷åîöèíêîâàííûé
  • GB 50018-2002. Technical Code of Cold-formed Thin-wall Steel Structures
Êîðûòíûå (U) ïðîôèëè
  • ÃÎÑÒ 8283-93. Ïðîôèëè ñòàëüíûå ãíóòûå êîðûòíûå ðàâíîïîëî÷íûå
Êðóãëûå è êâàäðàòíûå ñòåðæíè
  • EN 10059:2003. Hot rolled square steel bars for general purposes
  • EN 10060:2003. Hot rolled round steel bars for general purposes
  • ÃÎÑÒ 2590-2006. Ïðîêàò ñîðòîâîé ñòàëüíîé ãîðÿ÷åêàòàíûé êðóãëûé
  • ÃÎÑÒ 2591-2006. Ïðîêàò ñîðòîâîé ñòàëüíîé ãîðÿ÷åêàòàíûé êâàäðàòíûé
Êàíàòû
  • DIN 3052. Steel wire ropes - spiral rope 1×7
  • DIN 3053. Steel wire ropes - Spiral rope 1×19
  • DIN 3054. Steel wire ropes - Spiral rope 1×37
  • prEN 10138-3:2005. Prestressing steels — Part 3: Strand
  • ÃÎÑÒ 7667-80. Êàíàòû ñòàëüíûå. Ñîðòàìåíò. Êàíàò äâîéíîé ñâèâêè òèïà ËÊ-3 êîíñòðóêöèè 6×25(1+6; 6+12)+7×7(1+6)
  • ÃÎÑÒ 3081-80. Êàíàòû ñòàëüíûå. Ñîðòàìåíò. Êàíàò äâîéíîé ñâèâêè òèïà ËÊ-Î êîíñòðóêöèè 6×19(1+9+9)+7×7(1+6)
  • ÃÎÑÒ 3066-80. Êàíàòû ñòàëüíûå. Ñîðòàìåíò. Êàíàò äâîéíîé ñâèâêè òèïà ËÊ-Î êîíñòðóêöèè 6×7(1+6)+1×7(1+6)
  • ÃÎÑÒ 14954-80. Êàíàòû ñòàëüíûå. Ñîðòàìåíò. Êàíàò äâîéíîé ñâèâêè òèïà ËÊ-Ð êîíñòðóêöèè 6×19(1+6+6/6)+7×7(1+6)
  • ÃÎÑÒ 7669-80. Êàíàòû ñòàëüíûå. Ñîðòàìåíò. Êàíàò äâîéíîé ñâèâêè òèïà ËÊ-ÐÎ êîíñòðóêöèè 6×36(1+7+7/7+14)+7×7(1+6)
  • ÃÎÑÒ 3090-73. Êàíàòû ñòàëüíûå. Êàíàò çàêðûòûé íåñóùèé ñ îäíèì ñëîåì çåòîîáðàçíîé ïðîâîëîêè è ñåðäå÷íèêîì òèïà ÒÊ. Ñîðòàìåíò
  • ÃÎÑÒ 7675-73. Êàíàòû ñòàëüíûå. Êàíàò çàêðûòûé íåñóùèé ñ îäíèì ñëîåì êëèíîâèäíîé è îäíèì ñëîåì çåòîîáðàçíîé ïðîâîëîêè è ñåðäå÷íèêîì òèïà ÒÊ. Ñîðòàìåíò
  • ÃÎÑÒ 3062-80. Êàíàòû ñòàëüíûå. Êàíàò îäèíàðíîé ñâèâêè òèïà ËÊ-Ð êîíñòðóêöèè 1×7(1+6). Ñîðòàìåíò
  • ÃÎÑÒ 3063-80. Êàíàòû ñòàëüíûå. Êàíàò îäèíàðíîé ñâèâêè òèïà ÒÊ êîíñòðóêöèè 1×19(1+6+12). Ñîðòàìåíò
  • ÃÎÑÒ 3064-80. Êàíàòû ñòàëüíûå. Êàíàò îäèíàðíîé ñâèâêè òèïà ÒÊ êîíñòðóêöèè 1×37(1+6+12+18). Ñîðòàìåíò
Ëèñòîâîé ïðîêàò
  • EN 10058:2003. Hot rolled flat steel bars and steel wide flats for general purposes
  • ÄÑÒÓ 8540:2015. Ïðîêàò ëèñòîâèé ãàðÿ÷åêàòàíèé
  • ÃÎÑÒ 19903-2015. Ïðîêàò ëèñòîâîé ãîðÿ÷åêàòàíûé
  • ÑÏ 128.13330.2016. Äåìîíñòðàöèîííûé ñîðòàìåíò àëþìèíèåâîé ïîëîñû

Áàçà ñîðòàìåíòîâ ðåãóëÿðíî äîïîëíÿåòñÿ è àêòóàëèçèðóåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè ñòàíäàðòàìè, îäíàêî ïðè íåîáõîäèìîñòè ïîëüçîâàòåëü âñåãäà ìîæåò äîáàâèòü íóæíûé ñîðòàìåíò ñàìîñòîÿòåëüíî.

Óäîáíûå ôèëüòðû ñîðòàìåíòîâ

 ðåäàêòîðå ñîðòàìåíòîâ ðåàëèçîâàíû ôèëüòðû ñ ãðóïïèðîâêîé ïî ñòàíäàðòàì (EN, ÄÑÒÓ, ISO, ÃÎÑÒ è äðóãèå).

Ïîñëå ïðèìåíåíèÿ ôèëüòðà â ñïèñêàõ íàçíà÷åíèÿ ïàðàìåòðîâ ìåòàëëè÷åñêèõ ñå÷åíèé è â ïåðå÷íå ñîðòàìåíòîâ ñèñòåìû «Ðåäàêòèðóåìûé ñîðòàìåíò» îòîáðàæàþòñÿ òîëüêî ñîðòàìåíòû èç âûáðàííûõ ãðóïï. Ýòî ïîìîãàåò áûñòðåå îðèåíòèðîâàòüñÿ â áèáëèîòåêàõ ïðîôèëåé è ñòàëåé è ïîäáèðàòü íóæíûå ñîðòàìåíòû ñ ó÷¸òîì ðåãèîíà ïðîåêòèðîâàíèÿ.

Ñîçäàíèå ñîáñòâåííûõ ñîðòàìåíòîâ

ÐÑ — îòêðûòàÿ ñèñòåìà: ïîëüçîâàòåëþ ïðåäîñòàâëÿþòñÿ ñðåäñòâà äëÿ ñîçäàíèÿ íîâûõ è ðåäàêòèðîâàíèÿ óæå èìåþùèõñÿ ñîðòàìåíòîâ, à çíà÷èò, åñòü âîçìîæíîñòü äîáàâëÿòü àáñîëþòíî ëþáûå ñîðòàìåíòû ñîáñòâåííûìè ñèëàìè.

Ïîëüçîâàòåëü ìîæåò ñîçäàâàòü:

  • äâóòàâð;
  • øâåëëåð;
  • ðàâíîïîëî÷íûé è íåðàâíîïîëî÷íûé óãîëîê;
  • ïëàñòèíó;
  • òðóáó, êâàäðàòíóþ è ïðÿìîóãîëüíóþ òðóáó;
  • òàâð;
  • Ñ-îáðàçíîå ñå÷åíèå;
  • êâàäðàò, êðóã;
  • êàíàò;
  • Z-îáðàçíîå ñå÷åíèå;
  • êîðûòíîå ñå÷åíèå;
  • ïðîèçâîëüíîå ñå÷åíèå;
  • ñòàëü;
  • àëþìèíèåâûé ñïëàâ.

Äëÿ ýòîãî ðåàëèçîâàíî âû÷èñëåíèå ãåîìåòðè÷åñêèõ õàðàêòåðèñòèê ñå÷åíèé: ïëîùàäè, ìîìåíòîâ èíåðöèè, ìîìåíòîâ ñäâèãà, ñòàòè÷åñêèõ ìîìåíòîâ, êîîðäèíàò öåíòðà êðó÷åíèÿ è öåíòðà ñäâèãà, ñåêòîðèàëüíîãî ìîìåíòà èíåðöèè è äðóãèõ õàðàêòåðèñòèê, â ÷àñòíîñòè íåîáõîäèìûõ äëÿ ó÷¸òà ýôôåêòà äåïëàíàöèè ñå÷åíèÿ. Ðàñ÷¸ò âûïîëíÿåòñÿ àíàëèòè÷åñêè è ÷èñëåííî (ñ ïîìîùüþ ÌÊÅ), ñ âîçìîæíîñòüþ èçìåíåíèÿ øàãà òðèàíãóëÿöèè ñå÷åíèÿ.

Íàñòðîéêà äîïîëíåíèÿ

Äëÿ òîãî ÷òîáû îõâàòèòü âñ¸ ðàçíîîáðàçèå âîçìîæíûõ ôîðì ñå÷åíèé, ïðåäëàãàåìûõ çàâîäàìè, åñòü âîçìîæíîñòü ïîäêëþ÷àòü ïîëüçîâàòåëüñêèå òèïû ñå÷åíèé ê ñîðòàìåíòàì ïðîôèëåé è èñïîëüçîâàòü òàêèå ñîðòàìåíòû â êîíñòðóêòèâíîì ðàñ÷¸òå ñå÷åíèé/ýëåìåíòîâ.

Ñîçäàíèå ïîëüçîâàòåëüñêîãî ñîðòàìåíòà ïðîôèëåé

Îöåíèòå âîçìîæíîñòè

Åñëè ó âàñ âñå åùå åñòü ñîìíåíèÿ, çàãðóçèòå äåìîíñòðàöèîííóþ âåðñèþ è ïîïðîáóéòå èëè ñâÿæèòåñü ñ íàøåé ñëóæáîé ïîääåðæêè äëÿ ïîëó÷åíèÿ áîëåå ïîäðîáíîé èíôîðìàöèè.

Äåìîíñòðàöèîííàÿ âåðñèÿ èëè Çàïðîñèòü îíëàéí-ïðåçåíòàöèþ
Êîíôèãóðàöèè è öåíû
Êóïèòü
Íåêîììåð÷åñêàÿ âåðñèÿ